No products in the cart.
Description
Wall Cladding Brick Insert Liner Mould
Approx Size of the liner mould is 590mm x 290mm
Approx size of actual brick 250mm x 70mm
To use this insert mould, you will need to make your own wooden box that has been screwed together, so that your liner can sit at the bottom of the box, this can be glued into place if you wish.
A release agent should be used before the mould is filled.
You can join more than one insert together to give you a longer length by cutting the interlocking bricks and slotting the two moulds together as in the pictures above.
To make a retaining wall of 590mm long, you will need one insert.
To make a retaining wall of 1090mm you will need two inserts.
To make a retaining wall of 1590mm, you will need three inserts and so on for longer lengths
Please note that this listing is for one mould only, you will need to purchase multiple moulds to make longer lengths.
